Chi tiết sản phẩm
Mô tả
PEM® Type SH installs into thin, harder, high strength steel materials. They allow for overall weight reduction for all vehicles. As well as address environmental / recycle concerns, provide lower installed costs, and allow component standardization.
| SH | – | 0420 | – | 1 | X |
| | | | | | | |||
| Type | Thread Size Code | Shank Code | Finish Code | ||
| HFLH | – | 0420 | – | 20 | ZI |
| | | | | | | |||
| Type | Thread Size Code | Shank Code | Finish Code |
Material – Hardened Alloy Steel
Thread Size |
.250-20 (1/4-20) |
Thread Code |
0420 |
Shank Code |
1 |
A (Shank) Max. |
.054 in
|
| Min. Sheet Thickness1 | .056 in |
Hole Size in Sheet + .003 – .000 |
.344 in |
C Max. |
.343 in |
E ± .010 |
.440 in |
T ± .010 |
.170 in |
Min. Dist. Hole C/L to Edge |
.34 in |
| For Use in Sheet Hardness2 | HRC 30 / HB 277 or Less |
Thread Specification |
Internal, ASME B1.1, 2B / ASME B1.13M, 6H |
Fastener Material |
Hardened Alloy Steel |
| Standard Finish3 | No Finish (with Rust Preventative Oil) |
Optional Finish |
Consult technical support for recommended optional finishes. |
CAD Supplier |
PennEngineering® (PEM®) |
Nguồn: https://catalog.pemnet.com/category/hard-panel-nuts-type-sh
